Doza Pumps meter every chemical in your wash, from tire shine to soaps and waxes, with ±1% repeatability. See what each car costs and cut chemical spend by up to 30%.
Doza Pump MSRP $999. DozaLink $10 per device per month. See pricing.
Selling to car washes? Become a distributor.
Use cases
Run it from your wash controller, or on a timed schedule with no wash signal at all. Not sure about a product? Send us the safety data sheet.
Solvent-based and water-based tire shine, on black Tire Shine tubing. A set amount per car, so an expensive chemical stops going on the floor.
Tire shine setupPresoaks, detergents, foams, conditioners and wheel and tire cleaners. A fixed dose per signal, or a flow rate while the step runs.
Soaps and foamsWaxes, sealants, ceramic products, rinse aids and drying agents, each with its own dose, price and cost per car.
Waxes and drying agentsDose at set times with no wash signal, for jobs such as treating reclaim water. The schedule runs on the pump itself.
Scheduled dosingPlatform
From the pump head to the P&L: every dose measured, priced and reported.
Every dose is metered and priced automatically, so you can see what your chemistry really costs by site, chemical and device.
Metered dosing ends overspray and hand-tuned guesswork, and sealed pump heads with no tips to clog repeat each dose within ±1%. Most operators find double-digit savings in the first month.
Viewer, Operator, Admin and Owner roles, limited to the locations you choose. An admin can lock the controls at the device, and the audit log shows every change with the values before and after.
DozaLink counts down your stock with every dose and alerts you before a chemical runs out mid-shift, not after.
Manage all your washes from anywhere, and give each person access to only the locations they need.
Settings and schedules live on the device, so a dropped internet connection doesn't stop dosing. Doses made offline are reported when it reconnects.
Live demo
The real DozaLink, running on demo data. Click around and try it.
The demo is read-only.
Setup
Mount the unit at your wash, connect the chemical lines and relays, and join it to Wi-Fi. It works with the controller you already have.
Link the device in DozaLink, pick its chemical and set your doses. From then on, every dose is recorded.
Monitor every site from anywhere. Adjust dosing, track costs, and get alerts on your phone.
Specifications
Repeatability measured on the bench with water and new white Standard tubing. Delivered volume depends on calibration, chemical thickness and line conditions. Full details are in the Operation Manual.
Doza meters the chemicals used in car washes: solvent-based and water-based tire shine, presoaks, detergents, foams, conditioners, wheel and tire cleaners, waxes, sealants, rinse aids, drying agents and reclaim water treatment. If you have an unusual product, send us its safety data sheet and we will check it.
White Standard tubing suits most chemicals, at up to 5.0 mL/s and about 1,000 pumping hours. Black Tire Shine tubing is for solvent-based and water-based tire shine, at up to 3.0 mL/s and about 100 pumping hours. Tubing hours are tracked, so you know when service is due. We sell replacement tubing, and we can source custom tubing if your application needs it.
Doza runs from any controller output that is 24 to 120 V AC or DC when on, whichever brand you have. Each unit has two inputs, and either input can run either pump or both.
Yes. Settings and schedules are stored on the device, so a dropped connection does not stop dosing, and doses made offline are reported when it reconnects. If a device running a schedule loses power, the schedule pauses until it gets the time back, either from Wi-Fi or from your phone on its setup page. Wash-triggered dosing does not need the time.
You decide. DozaLink has Viewer, Operator, Admin and Owner roles, each limited to the locations you choose. An admin can also lock the controls at the device, and the audit log shows every change with before and after values.
Doza Pumps have an MSRP of $999. To buy, contact sales at sales@dozalink.com or use the Contact Sales button. DozaLink is billed monthly per linked device, with no charge for users or locations.
No. Doza Pumps run without one: you set doses, calibrate and run schedules on the device's own setup page. You just won't have what DozaLink adds, such as remote changes, cost per car, usage reports, alerts, team roles and the audit log.
Yes. If you sell to car washes, choose the distributor option on the contact form or email sales@dozalink.com and tell us about your company and the lines you carry.
See how Doza compares with air pumps, solenoid pumps, proportioners and metering tips, or read the DozaLink pricing.
Tell us about your sites and the chemicals you run, and we'll help you work out how many units you need and how they'd fit your setup.
Or email us at sales@dozalink.com
Join our mailing list for product news and new guides.